教师名录

2025.07 – 今：         上海交通大学   船建学院    长聘副教授          博士生导师
2022.07 – 2025.06：上海交通大学   船建学院    长聘教轨副教授    博士生导师
2020.01 – 2022.06：上海交通大学   船建学院    助理教授             博士生导师
2019.09 – 2019.12：香港理工大学   土木及环境工程系     博士后
2018.06 – 2019.08：香港大学         土木工程系             博士后
2018.01 – 2018.06：澳门大学         土木及环境工程系     博士后
2017.09 – 2017.12：香港大学         土木工程系             博士后
2014.09 – 2017.09：香港大学         土木工程系             博士（香港政府全额奖学金Hong Kong PhD Fellowship）
2012.09 – 2014.08：香港大学         土木工程系             硕士（香港大学全额奖学金）
2008.09 – 2012.08：香港大学&中山大学 土木工程系        学士（一级荣誉）

3D打印钢结构 (Additively manufactured steel structures)

结构拓扑优化 (Topology optimization of structures)

高性能钢结构连接节点 (High performance steel welded connections and tubular joints)

美国土木工程师学会会刊《Journal of Structural Engineering》(ASCE，JCR一区) 副主编
英国结构工程师学会会刊《Structures》(Elsevier，JCR一区) 副主编
《Thin-Walled Structures》(Elsevier，JCR一区) 编委

美国土木工程师学会（ASCE）会员
中国工程建设标准化协会轻型钢结构专业委员会委员
中国钢结构协会结构稳定与疲劳分会青年理事
核心期刊《建筑钢结构进展》青年编委
中国建筑金属结构协会检测鉴定加固改造分会委员
国际学术会议（International Conference on Advances in Steel Structures，ICASS）学术委员会委员
国际学术会议（The 13th International Conference on Advances in Steel-Concrete Composite Structures）组织委员会委员

多份SCI期刊特约审稿人，部分如下：
Journal of Structural Engineering, ASCE
Engineering Structures, ELSEVIER
Journal of Constructional Steel Research, ELSEVIER
Thin-Walled Structures, ELSEVIER
Steel and Composite Structures, TECHNO-PRESS
Advances in Structural Engineering, SAGE
Journal of Advanced Research, ELSEVIER
International Journal of Structural Stability and Dynamics
Structures, ELSEVIER

国家自然科学基金面上项目(52378167)：自由曲面空间网格结构3D打印节点力学性能与智能优化研究，2024.01-2027.12，主持
国家自然科学基金青年基金项目(52108157)：考虑冷弯效应和塑性演化的椭圆钢管相贯节点承载性能研究，2022.01-2024.12，主持
上海市青年科技启明星计划（A类资助）(24QA2704400)：空间钢结构节点性能提升机制与优化设计，2024.12-2027.11，主持
上海市自然科学基金面上项目(21ZR1429000)：超高强钢管节点在海洋腐蚀环境下的损伤演化与承载性能研究，2021.07-2024.06，主持
上海市青年科技英才扬帆计划(20YF1419400)：异型钢管焊接T型节点静力性能研究，2020.07-2023.06，主持
上海交通大学“双一流”建设项目人才科研启动基金，主持

上海市科委社会发展科技攻关项目：建筑全生命周期数字化管控关键技术研究及示范，2021.07-2024.06，项目骨干
国家重点研发计划“政府间国际科技创新合作”重点专项：正交异性钢桥面板疲劳裂纹的多尺度精细化智能监测技术研究，2021.07-2024.06，项目骨干
香港研究资助局面上项目：冷弯高强钢管鸟嘴式T型和X型节点性能，2021.01-2023.12，合作负责人（Co-Investigator）
香港研究资助局面上项目：轴力作用下冷弯高强钢管节点性能研究，2019.01-2021.12，合作负责人（Co-Investigator）
香港研究资助局面上项目：冷弯型钢半椭圆和椭圆空心截面在轴力与弯矩组合荷载下的受力性能研究，2018.01-2020.12，参与

香港发展局资助项目：关于MiC装配式模块一体化技术运用于香港高层建筑(高达40层)的结构可行性分析，2018.01-2018.12，参与
香港研究资助局面上项目：冷弯型钢半椭圆和椭圆空心截面的试验与数值研究，2017.01-2020.06，参与
澳门科学技术发展基金面上项目：冷弯和热轧椭圆形空心截面柱的设计，2015.06-2018.06，参与

发表SCI论文80余篇，基于Scopus总被引3800余次，高影响力指数H-index为40，ESI高被引论文22篇。

期刊论文：

[91] 左文康, 陈满泰*, 程斌, 赵金城. 计算机辅助空间结构节点智能优化设计与3D打印. 建筑结构学报, 2024, 45(4): 131-141. 
[90] 蔡骜, 陈满泰*, 左文康, 段立平,赵金城. 高强度钢材低温力学性能试验研究与预测模型. 上海交通大学学报,  2024, 58(11): 1707-1715.  
[89] 曹换, 蔡骜, 谌扬宇, 左文康, 陈满泰*. 极地低温下高强钢对接焊缝连接力学性能研究. 上海交通大学学报, 2025, 59(4): 533-540.

[88] Wenkang Zuo, Man-Tai Chen*, Ou Zhao, Leroy Gardner. Testing of wire arc additively manufactured duplex stainless steel double-lap shear bolted connections. Journal of Structural Engineering, 2025, 151(2): 04024205. (交大A档SCI)

[87] Yangyu Chen, Man-Tai Chen*, Ou Zhao, Cheng Huang, Leroy Gardner. Fatigue crack growth in wire arc additively manufactured ER2594 super-duplex stainless steel — testing and modelling. Engineering Structures, 2025, 343: 120912. (交大A档SCI)

[86] Zhichao Gong, Hai-Ting Li, Wei Chen, Ou Zhao, Man-Tai Chen*. Post-fire tensile behavior of wire arc additively manufactured duplex stainless steel plates. Engineering Structures, 2025, 343: 120800. (交大A档SCI)

[85] Yangyu Chen, Man-Tai Chen*, Ou Zhao, Barbara Rossi, Xiongfeng Ruan. Fatigue crack growth behavior of wire arc additively manufactured 316L austenitic stainless steel. Thin-walled Structures, 2025, 212: 113182. (交大A档SCI)

[84] Man-Tai Chen, Yangyu Chen, Cheng Huang*, Leroy Gardner, Ou Zhao. Experimental investigation of fatigue crack growth in wire arc additively manufactured ER2209 duplex stainless steel. Journal of Constructional Steel Research, 2025, 231: 109615. (交大B档SCI)

[83] Man-Tai Chen, Yang Pan, Fengming Ren*, Huan Cao, Mianheng Lai, Jingjing Zhang. Experimental investigation and predictive model on tensile behavior of corroded high-strength steel and butt-welded connections. Thin-walled Structures, 2025, 210: 112982. (交大A档SCI)

[82] Shichang Hu, Madhup Pandey, Man-Tai Chen*, Ben Young. Numerical investigation and design of cold-formed steel elliptical hollow section X-joints under brace axial compression. Thin-walled Structures, 2025, 215: 113374. (交大A档SCI)

[81] Zhichao Gong, Hai-Ting Li, Wei Chen, Ou Zhao, Man-Tai Chen*. Material properties of wire arc additively manufactured austenitic stainless steels after exposure to elevated temperatures. Thin-walled Structures, 2025, 211: 113061. (交大A档SCI)

[80] Lili Hu, Xinyu Ding, Lingzhen Li, Man-Tai Chen*, Peng Feng. Theoretical analysis and design method of CFRP-strengthened inclined welded steel plates with initial cracks under fatigue loadings. Engineering Structures, 2025, 339: 120666. (交大A档SCI)

[79] Man-Tai Chen, Zhichao Gong, Huan Cao, Chen Shen, Fengming Ren, Johnny Ching Ming Ho, Mianheng Lai*. Tensile behavior of Q890 and Q960 high-strength steel butt joints after corrosion. Engineering Structures, 2025, 330: 119738. (交大A档SCI)

[78] Yangyu Chen, Shichang Hu, Man-Tai Chen*, Madhup Pandey, Ben Young. Design of Cold-formed Steel Elliptical Hollow Section T-joints. Thin-walled Structures, 2025, 216: 113615. (交大A档SCI)

[77] Lili Hu, Xinyu Ding, Lingzhen Li, Man-Tai Chen*, Yaolin Zhang. Fatigue behavior of CFRP-strengthened inclined welded steel plates with initial cracks. Thin-walled Structures, 2025, 209: 112903. (交大A档SCI)

[76] Fei Chen, Nianguan Teng, Jinghai Gong, Man-Tai Chen*. Dynamic behavior of high-speed maglev guideway girders with quadratically-varied cross-section. Engineering Structures, 2025, 323: 119140. (交大A档SCI)

[75] Jin Li, Ke Jiang, Man-Tai Chen, Ou Zhao*, Leroy Gardner. Post-fire behaviour of wire arc additively manufactured ER70S-6 steel. Engineering Structures, 2025, 334: 120192. (交大A档SCI)

[74] Yukai Zhong, Ke Jiang, Man-Tai Chen, Andi Su, Ou Zhao*. Local buckling of stainless steel stub columns with novel octagonal hollow sections. Engineering Structures, 2025, 338: 120512. (交大A档SCI)

[73] Guangdi You, Rui Wang, Hui Zhao*, Guoqing An, Man-Tai Chen, Yunhe Wang. Eccentric compression behavior of tapered RACFHDST columns with large hollow ratios. Journal of Constructional Steel Research, 2025, 227: 109345. (交大B档SCI)

[72] Xiangjiao Wu, Hui Zhao*, Rui Wang, Yunhe Wang, Hongzhi Cui, Man-Tai Chen. Bending behaviour of raw coal gangue concrete-filled steel tubes. Structures, 2025, 76: 108989. (交大B档SCI)

[71] Jialin Li, Rui Wang, Hui Zhao*, Yunhe Wang, Hongzhi Cui, Man-Tai Chen. Eccentric compression behaviour of raw coal gangue CFST slender columns. Structures, 2025, 78: 109372. (交大B档SCI)

[70] Qianzhi Chen, Shuai Li, Andi Su, Man-Tai Chen, Ou Zhao*. Flexural buckling and analysis of S690 high strength steel welded π-shaped section columns. Thin-walled Structures, 2025, 216: 113754. (交大A档SCI)

[69] Yilin Yuan, Guodong Zhang*, Tong Guo, Man-Tai Chen, Ran Ma. Cyclic elastoplastic behavior and constitutive modeling of additively manufactured 304 L stainless steel. Journal of Constructional Steel Research, 2025, 235: 109908. (交大B档SCI)

[68] Yunhe Wang, Yupeng Guo, Rui Wang, Hui Zhao*, Wen-Da Wang, Man-Tai Chen. Cyclic response of tapered recycled aggregate concrete-filled high-strength double-skin steel tube column. Journal of Constructional Steel Research, 2026, 236: 109948. (交大B档SCI)

[67] Xuanlu Shi, Shuai Li, Jin Li, Man-Tai Chen, Ou Zhao*. Tensile behaviour of joints composed of dissimilar metallic plates fabricated by wire arc additive manufacturing. Engineering Structures, 2026, 346: 121627. (交大A档SCI)

[66] Jin Li, Ke Jiang, Man-Tai Chen, Ziyi Wang, Ou Zhao*, Leroy Gardner. Mechanical properties and constitutive modelling of wire arc additively manufactured aluminium alloy after exposure to elevated temperatures. Thin-walled Structures, 2026, 218: 114119. (交大A档SCI)

[65] Man-Tai Chen, Wenkang Zuo*, Yangyu Chen, Ou Zhao, Bin Cheng, Jincheng Zhao. Parametric topology optimization design and analysis of additively manufactured joints in spatial grid structures. Engineering Structures, 2024, 300: 117123. (交大A档SCI)

[64] Man-Tai Chen, Tianyi Zhang, Zhichao Gong, Wenkang Zuo, Zhongxing Wang, Liang Zong, Ou Zhao, Lili Hu*. Mechanical properties and microstructure characteristics of wire arc additively manufactured high-strength steels. Engineering Structures, 2024, 300: 117092. (交大A档SCI)

[63] Man-Tai Chen, Zhichao Gong, Tianyi Zhang, Wenkang Zuo, Yang Zhao, Ou Zhao, Guodong Zhang, Zhongxing Wang*. Mechanical behavior of austenitic stainless steels produced by wire arc additive manufacturing. Thin-walled Structures, 2024, 196: 111455. (交大A档SCI)

[62] Wenkang Zuo, Man-Tai Chen*, Ou Zhao, Andi Su, Si-Wei Liu, Fangda Xu, Yuner Huang, Bin Cheng. Behavior of wire arc additively manufactured 316L austenitic stainless steel single shear bolted connections. Thin-walled Structures, 2024, 202: 112075. (交大A档SCI)

[61] Wenkang Zuo, Man-Tai Chen*, Si-Wei Liu, Xiang Yun, Ou Zhao, Yuner Huang, Bin Cheng. Experimental investigation on double-lap shear behavior of 3D printed austenitic stainless steel bolted connections. Engineering Structures, 2024, 317: 118501. (交大A档SCI)

[60] Wenkang Zuo, Man-Tai Chen*, Ben Young. Post-fire behavior of cold-formed steel semi-oval hollow stub columns. Journal of Structural Engineering, 2024, 150(10): 04024141. (交大A档SCI)

[59] Wenkang Zuo, Man-Tai Chen*, Ou Zhao, Andi Su, Si-Wei Liu, Xiang Yun, Fangda Xu. Structural performance of wire arc additively manufactured duplex stainless steel single-lap shear bolted connections. Engineering Structures, 2024, 319: 118706. (交大A档SCI)

[58] Man-Tai Chen, Yangyu Chen, Wenkang Zuo*, Xiang Yun, Ou Zhao, Si-Wei Liu, Fangda Xu. Experimental investigation on the tensile behavior of wire arc additively manufactured duplex stainless steel plates. Engineering Structures, 2024, 321: 118764. (交大A档SCI)

[57] Wenkang Zuo, Man-Tai Chen*, Ben Young. Structural behaviour of cold-formed steel elliptical hollow section stub columns after exposure to ISO-834 fire curve. Thin-walled Structures, 2024, 197: 111309. (交大A档SCI) 

[56] Man-Tai Chen, Zhichao Gong, Huan Cao, Jingjing Zhang, Fengming Ren, Johnny Ching Ming Ho, Mianheng Lai*. Residual mechanical properties of corroded ultra-high-strength steels and weld metals. Thin-walled Structures, 2024, 205: 112397. (交大A档SCI)

[55] Zhongxing Wang, Yuhang Hou, Cheng Huang*, Qinghua Han, Liang Zong, Man-Tai Chen, Kailai Deng, Leroy Gardner. Experimental study and constitutive modelling of wire arc additively manufactured steel under cyclic loading. Journal of Constructional Steel Research, 2024, 213: 108420. (交大B档SCI)

[54] Kanglong Wu, Chen Shen*, Jianwen Xin, Yuhan Ding, Lin Wang, Wenlu Zhou, Gang Ruan, Yuelong Zhang, Fang Li, Kolan Madhav Reddy, Man-Tai Chen, Xueming Hua*. Tailoring the microstructure and tensile properties of directed energy deposition-arc buildup 2209 duplex stainless steel by variable polarity energy arrangement. Journal of Manufacturing Processes, 2024, 127: 433-445. (SCI)

[53] Kanglong Wu, Chen Shen*, Peizhi Xu, Jianwen Xin, Yuhan Ding, Lin Wang, Wenlu Zhou, Gang Ruan, Yuelong Zhang, Fang Li, Man-Tai Chen, Xueming Hua*. Revealing the evolution of microstructure and mechanical properties with deposition energy and shielding gas to achieve phase-balanced directed energy deposition of 2205 duplex stainless steel. Materials Science and Engineering: A, 2024, 915: 147197. (SCI)

[52] Qianzhi Chen, Lulu Zhang, Man-Tai Chen, Ou Zhao*. Experimental investigation and predictive models of membrane residual stresses in S690 high strength steel welded π-shaped and cruciform sections. Engineering Structures, 2024, 303: 117501. (交大A档SCI)

[51] Shuai Li, Yating Liang, Man-Tai Chen, Ou Zhao*. Flexural buckling of cold-formed austenitic stainless steel flat-oval hollow section columns: Testing, modelling and design. Thin-walled Structures, 2024, 199: 111795. (交大A档SCI)

[50] Shuai Li, Ke Jiang, Man-Tai Chen, Andi Su, Tong Guo, Ou Zhao*. Cross-section behaviour and capacity of cold-formed austenitic stainless steel flat-oval hollow sections under combined compression and bending. Thin-walled Structures, 2024, 199: 111877. (交大A档SCI)

[49] Shuai Li, Andi Su, Man-Tai Chen, Ou Zhao*. Structural behaviour and design of cold-formed austenitic stainless steel flat-oval hollow section beam-columns. Engineering Structures, 2024, 316: 118525. (交大A档SCI)

[48] Xinyu Ding, Xu Liang, Man-Tai Chen, Lili Hu*. Study on CFRP-Strengthened Welded Steel Plates with Inclined Welds Considering Welding Residual Stress. Materials, 2024, 17(8): 1804.

[47] André Dias Martins, Dinar Camotim*, Pedro Borges Dinis, Man-Tai Chen, Ben Young. Local-Distortional Interaction in Cold-formed Steel Lipped Channel Beams: Experimental Investigation. Steel Construction, 2023, 16(2): 68-77.

[46] Tianyi Zhang, Man-Tai Chen*, Ao Cai, Huan Cao, Xiang Yun, Hui Zhao, Chen Shen, Yuelong Zhang. Behaviour of high strength steel butt joints exposed to arctic low temperatures. Thin-walled Structures, 2023, 192: 111157. (交大A档SCI) 
[45] Man-Tai Chen*, Yangyu Chen, Ben Young. Static strengths of cold-formed steel elliptical hollow section X-joints. Thin-walled Structures, 2023, 191: 110997. (交大A档SCI) 
[44] Wenkang Zuo, Man-Tai Chen*, Yangyu Chen, Ou Zhao, Bin Cheng, Jincheng Zhao. Additive Manufacturing Oriented Parametric Topology Optimization Design and Numerical Analysis of Steel Joints in Gridshell Structures. Thin-walled Structures, 2023, 188: 110817. (交大A档SCI) 
[43] Man-Tai Chen*, Wenkang Zuo, Ben Young. Tests of cold-formed steel T-joints with semi-oval hollow section chord. Journal of Structural Engineering, ASCE, 2023, 149(8): 04023099. (交大A档SCI) 
[42] Man-Tai Chen*, Tianyi Zhang, Ben Young. Behavior of concrete-filled cold-formed steel built-up section stub columns. Thin-walled Structures, 2023, 187: 110692. (交大A档SCI) 
[41] Man-Tai Chen*, Yangyu Chen, Ben Young. Experimental investigation on cold-formed steel elliptical hollow section T-joints. Engineering Structures, 2023, 283: 115593. (交大A档SCI) 
[40] Man-Tai Chen, Ao Cai, Madhup Pandey, Chen Shen, Yuelong Zhang, Lili Hu*. Mechanical properties of high strength steels and weld metals at arctic low temperatures. Thin-walled Structures, 2023, 185: 110543. (交大A档SCI) 
[39] Shusheng Yi, Man-Tai Chen*, Ben Young. Stub column behavior of concrete-filled cold-formed steel semi-oval sections. Journal of Structural Engineering, ASCE, 2023, 149(3): 04023001. (交大A档SCI) 
[38] Shusheng Yi, Man-Tai Chen*, Ben Young. Design of concrete-filled cold-formed steel elliptical stub columns. Engineering Structures, 2023, 276: 115269. (交大A档SCI) 
[37] Robert Z.C. Lim, Daniel T.W. Looi*, Man-Tai Chen, Hing-Ho Tsang, John L. Wilson. A component-based macro-mechanical model for inter-module connections in steel volumetric buildings. Journal of Constructional Steel Research, 2023, 207: 107954. (交大B档SCI 
[36] Xuan Li, Rui Wang, Hui Zhao*, Man-Tai Chen, Dennis Lam. Bond behaviour of round-ended recycled aggregate concrete filled steel tube (RE-RACFST) columns. Journal of Constructional Steel Research, 2023, 201: 107700. (交大B档SCI) 
[35] André Dias Martins, Dinar Camotim*, Pedro Borges Dinis, Man-Tai Chen, Ben Young. Local-Distortional Interaction in CFS Lipped Channel Beams: Experimental Investigation. Steel Construction, 2023, 16(2): 68-77. 
[34] André Dias Martins, Dinar Camotim*, Pedro Borges Dinis, Man-Tai Chen, Ben Young. Design approach against column local-distortional interactive failures based on the Direct Strength Method. Thin-walled Structures, 2022, 181: 110081. (交大A档SCI) 
[33] Man-Tai Chen, Madhup Pandey*, Ben Young. Mechanical properties of cold-formed steel semi-oval hollow sections after ISO-834 fire. Thin-walled Structures, 2021, 167: 108202. (交大A档SCI) 
[32] Bin Cheng, Fenghua Huang, Yinghao Duan, Man-Tai Chen*. Fatigue performance of bird-beak SHS gap K-joints under brace in-plane force. Journal of Structural Engineering, ASCE, 2021, 147(11): 04021167. (交大A档SCI)
[31] Man-Tai Chen*, Ben Young. Numerical analysis and design of cold-formed steel elliptical hollow sections under combined compression and bending. Engineering Structures, 2021, 241: 112417. (交大A档SCI)
[30] Man-Tai Chen, Madhup Pandey*, Ben Young. Post-fire residual material properties of cold-formed steel elliptical hollow sections. Journal of Constructional Steel Research, 2021, 183: 106723. (交大B档SCI)
[29] Man-Tai Chen*, Ben Young. Beam-column design of cold-formed steel semi-oval hollow non-slender sections. Thin-walled Structures, 2021, 162: 107376. (交大A档SCI)
[28] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending. Thin-walled Structures, 2021, 161: 107494. (交大A档SCI)
[27] Yinghao Duan, Bin Cheng*, Fenghua Huang, Man-Tai Chen. Stress concentration factors of brace in-plane loaded bird-beak SHS gap K-joints. Journal of Constructional Steel Research, 2021, 181: 106592. (交大B档SCI)
[26] Fenghua Huang, Bin Cheng*, Yinghao Duan, Man-Tai Chen, Jiajie Tian. Stress concentrations and fatigue behavior of bird-beak SHS overlap K-joints subjected to brace in-plane force. Thin-walled Structures, 2021, 161: 107446. (交大A档SCI)
[25] Dinar Camotim*, André Dias Martins, Pedro Borges Dinis, Ben Young, Man-Tai Chen, Alexandre Landesmann. Mode interaction in cold-formed steel members: state-of-art report. Part 2: Couplings involving global buckling. Steel Construction, 2020, 13(3): 186-207.
[24] Dinar Camotim*, André Dias Martins, Pedro Borges Dinis, Ben Young, Man-Tai Chen, Alexandre Landesmann. Mode interaction in cold-formed steel members: state-of-art report. Part 1: Fundamentals and local-distortional coupling. Steel Construction, 2020, 13(3): 165-185.
[23] Man-Tai Chen*, Ben Young. Tensile tests of cold-formed stainless steel tubes. Journal of Structural Engineering, ASCE, 2020, 146(9): 04020165. (交大A档SCI)
[22] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. Uniformly Bent CFS Lipped Channel Beams Experiencing Local-Distortional Interaction: Experimental Investigation. Journal of Constructional Steel Research, 2020, 170: 106098. (交大B档SCI)
[21] Man-Tai Chen*, Ben Young. Tests of cold-formed normal and high strength steel tubes under tension. Thin-walled Structures, 2020, 153: 106844. (交大A档SCI)
[20] M.H. Lai, W. Song, X.L. Ou, M.T. Chen, Q. Wang, J.C.M. Ho*. A path dependent stress-strain model for concrete-filled-steel-tube column. Engineering Structures, 2020, 211: 110312. (交大A档SCI)
[19] Man-Tai Chen, Ben Young, André Dias Martins, Dinar Camotim*, Pedro Borges Dinis. Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction. Thin-walled Structures, 2020, 150: 106682. (交大A档SCI)
[18] Man-Tai Chen*, Ben Young. Tests of cold-formed steel semi-oval hollow section members under eccentric axial load. Journal of Structural Engineering, ASCE, 2020, 146(4): 04020027. (交大A档SCI)
[17] Mianheng Lai, Chengwei Li, Johnny Ching Ming Ho, Man-Tai Chen*. Experimental investigation on hollow-steel-tube columns with external confinements. Journal of Constructional Steel Research, 2020, 166: 105865. (交大B档SCI)
[16] M.H. Lai, Y.W. Liang, Q. Wang, F.M. Ren, M.T. Chen, J.C.M. Ho*. A stress-path dependent stress-strain model for FRP-confined concrete. Engineering Structures, 2020, 203: 109824. (交大A档SCI)
[15] Man-Tai Chen*, Ben Young. Beam-column tests of cold-formed steel elliptical hollow sections. Engineering Structures, 2020, 210: 109911. (交大A档SCI)
[14] J.C.M. Ho, X.L. Ou, M.T. Chen, Q. Wang, M.H. Lai*. A path dependent constitutive model for CFFT column. Engineering Structures, 2020, 210: 110367. (交大A档SCI)
[13] Man-Tai Chen*, Ben Young. Behavior of cold-formed steel elliptical hollow sections subjected to bending. Journal of Constructional Steel Research, 2019, 158: 317-330. (交大B档SCI)
[12] Man-Tai Chen*, Ben Young. Structural behavior of cold-formed steel semi-oval hollow section beams. Engineering Structures, 2019, 185: 400-411. (交大A档SCI)
[11] Ju-Jie Yan, Man-Tai Chen*, Wai-Meng Quach, Ming Yan, Ben Young. Mechanical properties and cross-sectional behavior of additive manufactured high strength steel tubular sections. Thin-walled Structures, 2019, 144: 106158. (交大A档SCI)
[10] M.H. Lai, M.T. Chen, F.M. Ren, J.C.M. Ho*. Uni-axial behaviour of externally confined UHSCFST columns. Thin-walled Structures, 2019, 142: 19-36. (交大A档SCI)
[9] Ju Chen, Man-Tai Chen*, Ben Young. Compression tests of cold-formed steel C- and Z-sections with different stiffeners. Journal of Structural Engineering, ASCE, 2019, 145(5): 04019022. (交大A档SCI)
[8] Yancheng Cai, Wai-Meng Quach*, Man-Tai Chen, Ben Young. Behavior and design of cold-formed and hot-finished steel elliptical tubular stub columns. Journal of Constructional Steel Research, 2019, 156: 252-265. (交大B档SCI)
[7] Man-Tai Chen*, Ben Young. Structural performance of cold-formed steel elliptical hollow section pin-ended columns. Thin-walled Structures, 2019, 136: 267-279. (交大A档SCI)
[6] Man-Tai Chen, Ben Young*. Material properties and structural behavior of cold-formed steel elliptical hollow section stub columns. Thin-walled Structures, 2019, 134: 111-126. (交大A档SCI)
[5] Sidi Shan, Daniel Looi, Yancheng Cai, Peng Ma, Man-Tai Chen, Ray Su, Ben Young, Wei Pan*. Engineering modular integrated construction for high-rise building: a case study in Hong Kong.” Proceedings of the Institution of Civil Engineers-Civil Engineering, 2019, 172(6): 51-57. (SCI)
[4] Man-Tai Chen, Ben Young*. Experimental and numerical investigation on pin-ended cold-formed steel semi-oval hollow section compression members. Journal of Constructional Steel Research, 2018, 151: 174-184. (交大B档SCI)
[3] Man-Tai Chen, Ben Young*. Cross-sectional behavior of cold-formed steel semi-oval hollow sections. Engineering Structures, 2018, 177: 318-330. (交大A档SCI)
[2] M.T. Chen, J.C.M. Ho*. Concurrent flexural strength and ductility design of RC beams via strain-gradient-dependent concrete stress-strain curve. The Structural Design of Tall and Special Buildings, 2015, 24(9): 629-652. (SCI)
[1] M.T. Chen, J.C.M. Ho*. Combined strain gradient and concrete strength effects on flexural strength and ductility design of RC columns. Computers and Concrete, 2015, 15(4): 607-642. (SCI)

正在指导博士生4名、硕士生4名，独立完成指导博士生1名、硕士生5名。

独立指导的研究生所获荣誉：

2024-2025年度研究生国家奖学金（谌扬宇-博士生）
2024-2025年度研究生国家奖学金（龚智超-硕士生）
2023-2024年度研究生国家奖学金（龚智超-硕士生）
2022-2023年度研究生国家奖学金（左文康-博士生）

2024-2025年度长江思源励志奖学金（曹端溢-硕士生）
2022-2023年度郭谢碧蓉优秀奖学金（张天一-硕士生）
2022-2023年度杨裕球奖学金（胡仕昌-硕士生）

2023年江苏省研究生岩土工程与结构防灾学术创新论坛专题报告特等奖（左文康-博士生）
2023届上海市优秀毕业生（蔡骜-硕士生）
2024届上海交通大学优秀毕业生（左文康-博士生）
2025届上海交通大学优秀毕业生（胡仕昌-硕士生）

指导学生科创：

2023年中国钢结构协会高等学校钢结构创新竞赛二等奖 （胡仕昌、孙铭阳、龚智超、荣翊成、谌扬宇、王诗辰）
2022年中国钢结构协会高等学校钢结构创新竞赛二等奖 （谌扬宇、韦振泽、赵豆豆、张凯淇、张恩启）
2022年“XbotPark”杯3D打印创新创业大赛二等奖 （左文康、龚智超、谌扬宇、苟颖超、蔡骜、曹换）
上海市优秀大创项目 （胡奕伟、龚智超、曾超侣）
上海交大第39期PRP项目 （胡奕伟、龚智超）

指导本科生毕业设计/论文；担任本科生导师，本科生班主任 (土木工程F1901005)